This is the fully built and complete unit, just plug and use.

Plus, get a FREE copy of several plugins to use with your controller: Wusik Station X, Wusik ST8, Wusik STX (DAW) and Wusik 8008.

4x4 USB MIDI Controller With RGB LEDs - USB MIDI Controller Using the Arduino Pro Micro (small Leonardo) ATMega32u4

Fully Programable with Windows, MAC and Linux direct support (no drivers needed). Just plug into the computer and use. By default it sends notes for each button.

Featuring:

• 32 x RGB LEDs (2 per button, on the left and right sides);
• 18 x Buttons (no matrix, so any combination of buttons can be detected); They are regular on/off buttons;
• 3D Printed Case and Buttons. Unit size: 15 x 15 x 20 cm (rubber feet excluded);
• Windows, MAC and Linux USB MIDI HID Device Compatible (no drivers needed);
• Windows and MAC App for customizing buttons, leds and also play audio loops. Using this app you can configure everything and save into the unit's EPROM memory;
• Multiple options for setting the device directly: MIDICC, Note On/Off, Note On/Off Latch. Just press and hold both top buttons for a few seconds to enter the configuration swap option;
• The unit also receives MIDI which can be used to set the RGB LEDs using note on/off. This is great for when you want to change LEDs with a sequencer or create your own App to handle LEDs. One particular note will turn on and off the unit handling of LEDs and will only react to input notes to set leds. Read more about this at the bottom of this page.

Works the same as the MIDI Only unit but can work completly StandAlone as it has its own Audio Playback engine. With option to play sounds per button or even loop sounds in sync with an internal sequencer.

The idea is to add a small OLED screen for settings, or configure it by using a computer and run StandAlone after.

My plan is to use the Banana Pi M2 Zero as it has plenty RAM. All in one board. But I will program it with Bare Metal code so it won't have any latency issues + instant on.

A complete drum and audio sequencer with 4 x 16 RGB LED + buttons. Navigation buttons and LCD Display (mostly going to be OLED).

My plan is to use the Banana Pi M2 Zero as it has plenty RAM. All in one board. But I will program it with Bare Metal code so it won't have any latency issues + instant on.

For a better detail, visit the Wusik site page: https://www.wusik.com/online-store/Wusik-B707mkII-p559600071

Wusik 44UM - This is just the PCB for either units and the 3D Printed Parts: Buttons and body.

Wusik OnWire is a new online hardware rental system that I'm currently working on. By joining today you will get 100 hours of usage that never expires. The idea is simple, you run a plugin or app that connects to a server, you log in, and you can process audio on the system, selecting from a variety of real devices (hardware units). Those could be a real plate reverb, spring reverb, FM sound transmitter and receiver, distortion effect, and many other units - all created by me. Everything is processed in real-time and via the Internet. You only get credit by the time you actually use it when processing something.

I'm still working on the server and the first devices, that's why I'm running this PreOrder, to help me out with all the initial costs. I will take pictures as I go, from the units that I created.

There's no subscription. You just pre-pay for hours and use those as you want.

And here is the AI Generated introduction (good grief) :-o

"Introducing Wusik OnWire, the Future of Audio Processing: Preorder Now for a Revolutionary Experience!

Are you tired of settling for digital imitations of authentic sound effects? Yearning for the warmth and character of real, tangible audio gear? Your search ends here! We proudly present our groundbreaking audio processing system that brings the magic of physical devices right to your fingertips.

Imagine a world where you can transform your recordings with the flick of a switch, where pristine audio meets the soulful essence of legendary effects. Our pioneering service allows you to harness the power of iconic hardware such as plate reverbs, distortion pedals, and much more – all without leaving the comfort of your own studio.

But how does it work? It's simple! Just connect to our cutting-edge server and send us your audio, and our team of expert sound engineers will take care of the rest. Your music will be routed through our meticulously curated collection of real, physical devices, ensuring an unparalleled level of authenticity and sonic richness.

Whether you're a professional musician, producer, or audio enthusiast, this is the opportunity you've been waiting for. Immerse yourself in the world of renowned gear without the financial burden or logistical challenges of owning and maintaining these devices. Our service is designed to give you the freedom to explore, experiment, and create like never before.

By preordering our service, you become an early adopter, securing exclusive access to this groundbreaking technology. You'll be among the first to experience the astonishing power and unparalleled realism of our audio processing system. Don't miss out on the chance to revolutionize your sound and elevate your music to new heights.

Act now and take advantage of our limited-time preorder offer! Secure your spot and join us on this exhilarating journey. With a dedicated team of audio enthusiasts and a commitment to pushing the boundaries of sound, we're here to transform your sonic landscape.

Prepare to embark on an audio adventure like no other. Reserve your preorder today and be at the forefront of the audio revolution!"

This perk will let you know anything about any hardware project that I'm doing before anyone else. Including pre-beta files and 3D Printable STL files

This also applies to any other of the orders above.